Details
C1000 LED Pixel Light C1 SD-card Controller's Features:
1. 32 level -65536 level grayscale control, software Gamma correction .
2. supports a variety of point, line, surface light source , supports a variety of rules , shaped handle .
3. single-port controller output , this C1000 SD card controller would drive up to 2048 pixels.
4. line control , play content stored in the SD-card.
5. C1 to store up to 16 files, multiple files sequentially copied to SD card.
6. stored in the SD card 's effect should in turn be named : 00_1.led, 01_1.led, 02_1.led.
7. compatible with single -wire IC, IC pick singlet lamps , no need CLK clock line.
Note: When 1. C1 ports with load 512 lights, the playback speed of up to 30 frames / sec ports with load more than 512 lights, frame rate with
Working Voltage: AC85V to AC 265V
Support chip:
WS2801, WS2803
WS2811, WS2812B, INK1003
TM1803, TM1804, TM1809, TM1812
LPD8806,LPD8809,
UCS1903, UCS1903B, UCS1909
LPD6803, D705
UCS1912
UCS2903, UCS2909, UCS2912
UCS6909, UCS6912, UCS7009
UCS5903
TLS3001
P9813
Package included:
1 Piece of C1000 LED Pixel Controller C1 SD-card Controller
1 Piece of SD Card (editing software already in the card)
1 Piece of User's manual
Note:
1. C1000 LED Pixel Controller is a single output port , with up to 2048 pixels ;
2. The new project in effect when editing software , select Control Model : C1-IC Model
3. If you want to remove the SD card, pls make sure remove or insert the SD card only when the controller is disconnected to the power
Question and Answer:
Question 1: After power-up, found C1 error ERROR indicator has been flashing, and no effect output!
Answer: ERROR indicator flashes error has been proved that the controller is not correctly read, possible problems are:
SD card inside is empty, there is no effect file.
SD card inside the effect file *. Led files and controller models do not match. Use the latest version Led Ctrl (Mostly we use LED Ctrl 2013) and choose the right model inside the controller C1- chip model , and re-create the effect of file *. Led.
SD card in effect until a copy of the file is not formatted as FAT kinds .
Replace the SD card before testing , SD card bad possibilities excluded.
effect file name wrong , change 00.led.
Question 2: The controller after power-up, normal light, but no effect changes in lighting!
Answer: The reasons for this are the following :
Check the signal line and the lighting controller is not connected properly .
fixtures and the controller must be common ground that the lamp to ground and ground controllers received together .
Please check the effect of making the SD card files * When led the selected model is consistent with the current chip used lamps .
Question 3: Connect the controller and lighting , strobe lighting and effect change while controller indicator display properly.
Answer: ground between the controller and the lighting is not connected .
Effect made SD card inside a mistake, do not match the selected effect when the actual lighting fixtures chips and chips .
insufficient supply voltage lamps .
Question 4:SD card can not be formatted.
A: first confirm whether the side of the SD card protection switch has been unlocked . Unlocking the direction of the SD card lilies this end .
protect the lock has been designed according to the requirements , but still can not be formatted , if this is the case most of the SD card reader is broken , replace the SD card reading device .
If the above actions do not solve the problem of formatting, replace the SD card , re-testing.
CE and RoHS approved
Shipping & Delivery
We ship order very fast. Mostly the parcel will be shipped at the same or next business day. If you need the items urgently, Pls do contact us (service@rockonsupplier.com) for the delivery date right after or before you placed orders.
You would easily choose the Shipping Method (DHL/TNT/UPS/Fedex/ePacketl/China Air Post/Free Shipping Etc) when you check out, we will send you an email with your tracking number so you would track the parcel online.
For every order, all the products will be packed well to make sure you will quickly receive all the products at great condition. We weekly supply hundreds of parcels to Berlin, Hamburg, Munich, Cologne, Frankfurt, Essen, Dortmund, Stuttgart, Dusseldorf, Bremen, Duisburg, Hannover, Nuremberg, Leipzig, Dresden and other cities in Germany. We also ship to USA, UK, France, Italy, Switzerland, Spain, Canada, Sweden, Australia and other countries. The following are some photos we took during the checking and packing, we handle every order very carefully and quickly:
Ordering & Payment
We supply our clients with excellent products, quick shipping and professional service, Here are some screenshots of the PayPal payments to our account since 2015, as you would see, all of the orders has tracking number, and none of them has any problems to be asked for refund or something else, it is a good reference of our products and service: (We covered the name and email to protect the privacy of our clients)
We offer high quality products and service, so a lot of customers become our loyal customers after they bought from our company, a lot of companies are becoming our loyal customers too. Here are some cases for your reference:
For customized LED products or further assistance, Please feel free to contact our service team at service@rockonsupplier.com
Quick shipping with tracking number, easy and safe ordering with PayPal and Credit Card. Enjoy more quality LED lighting products with the latest technology on RockOnSupplier.com We daily update new products onto our website.